September 15, 2020
10/10 - Would campaign again!
Ever ask yourself, “How the heck is my campaign doing!?”
Well, now your campaign will have scoring metrics based on a 1-10 scale to help you gauge your campaign performance.
Located on the bids tab in your campaign, 1 indicates the lowest score and 10 is the highest.
For SOIs, you will have Acceptance % Score, which will give you a rating on your current Lead Acceptance Rate (Accepted Lead %).
For Linkouts, you will have a Click-through Rate Score (CTR Score). For both SOIs and Linkouts you will have an eCPM Score.
CTR and eCPM scores are based off of how well your CTR % and eCPM is doing relative to your competition in ZAN.
By looking at these scores, you will now be able to see at a glance how your campaign is doing comparatively.
August 7, 2020
SOI Creatives have gotten a facelift. We believe in creative expression, so now you can choose between the existing text-based layout or try a fresh new look with an image-based layout!
With the new image-based layout, your creative image size increases and allows you to convey your messaging directly through a beautiful image. In addition, by selecting image-based layout, you have the option to upload a 700x400 (desktop) and/or 600x600 (mobile) image for better device optimized image sizes.
August 6, 2020
We know how much you love copy and paste, but now you can add Link settings with the click of a button! When adding a Link to your Linkout campaign, click the "Load Settings From Another Link" button and choose which settings you would like to use.
April 2, 2020
Monetization settings and stats are now available in the monetization tab under placements. Now you can see how you have set up a monetization and the performance of each configuration at a glance.
February 3, 2020
Give your data a power boost! Learn more about a targeted group of your customer base by using custom questions to ask them exactly what’s on your mind. Want to know if your group of high-risk customers are planning to renew their cell phone contracts? Send over your list of highest potentials to Zeeto and when anyone on that list visits one of our partner sites on the network, Zeeto asks them the questions to find out the most valuable things about your customers to take your engagement to the next level.
January 16, 2020
You have a list of people you want to ask a question or show an ad to? We gotchu. Just upload the list (either phone number or email addresses) in the suppression tab and make your campaign target just the people on it. Tl;dr the opposite of a suppression list.
January 8, 2020
With the political season upon us, we are launching a whole new way to use Zeeto’s platform. In addition to asking people questions to qualify them for ads, you can now use Zeeto to ask people questions for polls. Want to know who the 52nd district will vote for in the primary? No problem! Who is leading in Iowa? Easy. What is Bloomberg's name recognition in Arizona? Done.
November 5, 2019
You’ve heard of try before you buy, right? Well now you can! The long-awaited Test Suppression allows you to test your suppression configuration in real time to ensure it’s working before you set your campaign live. With this enhanced tool, you can edit the sample visitor data (phone, email, zip code and ip address) to test proper visitor acceptance or rejection by your system, as well as proper list formatting for new or existing suppression lists. You can find this new feature by visiting the Suppression tab within your selected campaign.
November 4, 2019
Just in time for the holidays! Say goodbye to those pesky calendar reminders to manually manage campaign schedules. Campaign Blackout Ranges will now allow you to pause for specific dates, like holidays, while still having a normal schedule in place. You can find this amazing new feature by visiting to your campaign settings under the "Schedule" section.
October 3, 2019
Our invoices got an upgrade!
We’re excited to introduce the latest updates to Zeeto’s billing process. We’ve heard your feedback and are excited to announce our new detailed invoices and accounting reports in the ZAN platform.
Invoice line items got a makeover. Gone are the days of general ZAN “RON” and “O&O” Leads. You can now find your “Payable to Zeeto” cost per campaign detailed out on every invoice.
Better reporting visibility. You can view and cross-check past invoice details in ZAN too! Head over to the “Accounting” tab in the Reports section to see your total cost by campaign and amounts payable to Zeeto. You can also travel back in time and filter by date to get that all-important historical data.
Note: For additional information about historical data, please contact your account manager.
No more manual roll-ups. Have more than a single ZAN account? No sweat! You can find the same Advertiser and Publisher Reports in the shared client spaces within Looker. Use these reports to access roll-up data for all of your individual Zeeto accounts into one usable report.
“Cost” is the total ad spend for your campaign in the network, calculated by multiplying the bid rate times each conversion and then summing those amounts for the time period of the report.
“Payable to Zeeto” is the percentage of cost that is owed to Zeeto. This amount is determined by multiplying revenue share times cost. Revenue share amounts are different for cases when your campaigns convert on network properties and when they convert on a property that is owned-and-operated (O&O) by you.
When Cost and Payable to Zeeto amounts are the same...
In this scenario, your campaign(s) only converted on network properties and therefore Zeeto will collect 100% of your ad spend to pay the Publisher(s) after Zeeto takes our revenue share.
NOTE: If you are only an advertiser in ZAN, your Cost and Payable to Zeeto amounts will always match.
When Cost and Payable to Zeeto amounts are different...
In this scenario, some or all of your campaign(s) converted on your own O&O properties, meaning Zeeto only collects a portion of your ad spend based on our revenue share.
NOTE: If you are also a Publisher in ZAN, you will likely see these variable cost amounts on your invoices.
“Is Related” Dimension… Yes vs. No?
As an Advertiser, you may also pivot your cost data by the Publisher relationship using the “Is Related” dimension in Looker. Your “RON” cost is shown when “Is Related = No” and “O&O” cost when “Is Related = Yes.” Easy as that!
May 24, 2019
In this network, the competition is stiff. Setting up campaigns to win is key! After letting a campaign run long enough to have had a fair chance of succeeding, ZAN deactivates it if it isn't performing well for you. Top causes include things like incorrect or wonky attribute targeting (hint: this is the most common issue), CPA campaigns with pixel issues, and bidding that isn't competitive enough to gain volume. Failed status is a point of no return for that campaign. If you think it should have done better, and may have just had one of the issues mentioned above, you can create a new campaign in its place with the adjustments to give v2.0 a better chance. As always, please contact your account manager or our client success department for help if you need it.
January 7, 2019
Hold on to your hats everyone, attribute targeting just got a big update. Move at mach speeds as you select multiple attributes and assign them to a group with one click. This is a big win for discoverability since the increased real estate allows us to display more attributes on the page along with their definitions. Making sure you target your exact audience has never been easier. We're not done yet though, stay tuned for future improvements that we think you're going to love.
January 2, 2019
LTV pixels are a great way to monitor how awesome your campaign is performing, and we have the metrics to prove it. On the bids tab you can find conversions, revenue, cost per conversion, conversion rate, and ROI for the "purchase" LTV pixel. Find the targets that give you the best ROI and adjust bids accordingly.
January 2, 2019
Using reports to track your performance over time is crucial to your success. To help you get a grasp of the big picture, we've added daily granularity as an option when using the date range feature in the calendar. It's easier than ever to track those peaks and valleys.
January 2, 2019
Retargeting campaigns just got a major upgrade. If you need to add in a few more zip codes or just want to tweak your age targeting, you no longer have to fill out the entire targeting form again. ZAN will save your previous configuration, so when you go to retarget, you can make the changes you need and quickly be on your way.
January 2, 2019
Advertisers just got access to a brand new report. Use the Lead Response report to check out what your last 30 responses have been per campaign. This report is a great way to track overall lead delivery health, so you can stay on the ball.
January 2, 2019
New metrics are available on the bids tab. If you're running a link out campaign and have CPA selected as your rate type, clicks and CTR % are there to give you more insight.
January 2, 2019
Big news advertisers, all creatives added to ZAN must be approved by a Zeeto admin. The review process should be complete within two business days, barring the zombie apocalypse. While your creative is pending approval it will not be displayed, we run a tight ship here, so we need to make sure the ads on our network are the cream of the crop. Keep in mind, if you only have one creative, you won't be able to set your campaign active until the creative has been approved. Don't worry though, if your creative is denied, one of our friendly Zeeto agents will reach out and work with you to iron out any kinks.